Approx. Rs 27,500 / UnitGet Latest PriceProduct Details:
|Water Source||Municipal Sewage|
|Operating Pressure||150 PSI|
|Flow Rate||200-1000 LPH|
Approx. Rs 2 Lakh / PieceGet Latest PriceProduct Details:
|Type||Water Purification for Drinking|
|Capacity Inlet Flow Rate||100 m3/hour|
|Installation Type||Containerized Plug & Play|
The new Alfaa HiFlo systems use fewer lamps to generate a given UV dose, a result of our powerful new UV lamp technology. These lamps combine the high electrical efficiencies of low pressure lamps with up to five times the UV output. At the same time, they avoid the dangers of medium pressure lamps (inability to tolerate loss of flow for even a few seconds without drastic overheating or boiling of the water, inability to instantly restart following power outage or switch off and high power consumption) while providing an exceptional 12,500 hour lamp life. What does that mean to you? A smaller footprint, simplified maintenance, and lower operating costs.
Exclusive FloSteer Technology
FloSteer LogoUV is not simply a ‘lamp inside a pipe’. The UV reactor must be designed to ensure that all microbes receive sufficient exposure to the UV light (dose). Some reactors are subject to short circuiting, a phenomenon where microbes pass through the reactor without receiving an adequate dose. Computational Fluid Dynamics (CFD), the same modeling process used to optimize airplane and racecar designs for air flow, has been harnessed by Alfaa to design from ground up an effective and efficient UV reactor. Based on the hydraulic properties of water, the reactor has been greatly optimized to guide the flow in a manner so as to maximize residence time and boost turbulence. The figure alongside illustrates a CFD-modeled reactor. Each coloured strand represents the path of an individual particle through the reactor. The colour changes from blue to red as the retention time and UV dose increases.
Simple to install in space restricted areas, Alfaa HiFlo systems consume less space, cost less to operate, and perform more efficiently than any other comparable UV product. Extremely Precise UV Intensity Monitor Our new and innovative, fully calibrated UV sensor is encapsulated in a robust stainless steel housing that locks the sensor in place. This unique design completely eliminates sensor movement and allows sensor change-outs without opening or stopping the system.
Alfaa HiFlo Industrial Applications
Approx. Rs 1.78 Lakh / PieceGet Latest PriceProduct Details:
|Model Name/Number||Bio Pure|
|Flow Rate||200-1000 LPH|
|Record Capacity||3000 Records|
|Power Supply||230 V|
|Operating Pressure||Up to 150 PSI|
The user friendly digital controller provides extensive functionality and data logging capabilities.It can be easily interfaced to SCADA systems to extend functionality. The Biopure series has been designed from ground up to specifically cater to the high purity water distribution loops in pharmaceutical manufacturing units. The systems are optimized to provide high UV doses in an extremely small footprint utilizing high output UV lamps.
Features and Benefits:
A Validated Solution
With over 800 pharmaceutical installations and 10,000 industrial installations worldwide, Alfaa UV understands validation! Using carefully designed and selected components starting from the lamps and ballasts, to the intensity sensor, all components have been thoroughly proven. The BioPure range of UV systems are validated to meet all cGMP and US FDA standards. A complete documentation package includes drawings, manuals, and extensive certification (see below). Optionally, calibrated and validtated spares and replacement parts are also available
Certificates are provided for:
Explore More Products